Product Center_Boyue instrument (Shanghai) Co., Ltd.

Product Center

Elemental Analysis
+
Optical Emission Spectrometers In-Line XRF Analyzers Handheld XRF Spectrometers X-Ray Coating Analysis TXRF Spectrometers Micro-XRF Spectrometers EPR Instruments Itrax Core Scanner Information Management Systems
Surface Analysis
+
Stylus Profilometers 3D Optical Microscopes Nanomechanical Test Instruments Tribometers and Mechanical Testers Atomic Force Microscopes
Solar Energy Detection/Semiconductor
+
Film Stress Film Adhesion
General Equipment
+
DANTE DPP (digital pulse processor) Charge Sensitive Preamplifier CUBE PV/I-V Test Coating Thickness Gauges AFM Probes

DANTE DPP (digital pulse processor)

Brand：Bruker XGLAB

Model：DANTE DPP

Keyword tag：digital pulse processor，DPP， X and Gamma ray spectroscopy

021-37018108Online Message

Versatile Architecture digital pulse processor system for many kinds of detectors, designed for X and Gamma ray spectroscopy.

General design approach

· Provide best possible energy resolution.

· Provide good performance at fast count-rate.

· Handle very-high input count-rate.

· Optimized to be used in combination with CUBE.

· Reconfigurable and adaptable to several applications.

· Programmable trapezoidal digital filtering.

DANTE DPP - Main functionality

· Full-spectra acquisition system

· List (Event) mode operation with time-stamp

· Advance triggering system with gating, VETO, or any digital bus

· Burst spectra mode with individual spectrum logging via I/O bus

· Digital wave-scanner for direct preamplifier acquisition (in debug mode)

· Effective for lab instrumentation, scientific experiment, or as OEM component

· Daisy-chain mode enable to scale-up the system to large number of DPP channels with relatively small equipment.

· DAQ user interface, simple DLL libraries, or LabVIEW

Digital Pulse Processor Technical specifications

Input:

· Input signal: Pulsed reset (positive or negative polarity)

· Dynamic: (typ: +/- 1.5V).

· Analog gain: hardware selectable.

· Digital gain: available for fine-tuning desired gain.

· Input impedance: high or 50 Ohm.

· Connectors: coaxial SMA or LEMO for analog input, coaxial SMA of LEMO digital input or output, 2mm header for logical triggering (for elemental mapping synchronization).

· Maximum input rate: 10 Mcps.

· Maximum output rate: 1.8 Mcps @ ICR of 5 Mcps

Output

· Output info: Input Count Rate, Output Count rate, live-time.

· Output signals: Real time trigger

· Spectrum acquisition: typ 4K channels (expandable)

· Individual event time-stamp: 8ns precision

· Full-waveform input acquisition: length up to hundreds milliseconds at max speed (62.5 MHz).

Filtering

· Peaking times: selectable down to 32ns.

· Flat top: selectable down to 32ns.

· Spectra acquisition down to 1ms in burst mode.

· Zero dead-time between two subsequent spectra.

· Stable operation above 95% dead-time.

General

· Very compact single-board DPP design: 10 cm x 6 cm.

· Low power consumption: 3 W

· Advance triggering system with gating, VETO, or any digital bus

· Burst spectra mode with individual spectrum logging via I/O bus

· USB 2.0 or Ethernet TCP/IP

· Simple DLL libraries, Graphical User Interface or LabView VIs.

Click to learn more product information.

Contact our application team immediately: 021-37018108, info@boyuesh.com